Editor’s note-September 21, 2021: As the situation regarding coronavirus delta variants continues to evolve, some of the following booth information or display times may have been changed or moved to a virtual environment. Please visit www.weftec.org for the latest information on any changes in the WEFTEC program.
From October 16th to October 20th, water and wastewater industry professionals from all over the country will participate in WEFTEC 2021 in McCormick Place, Chicago, Illinois. This is the 94th edition of this multi-day exhibition and conference, and it is one of the cornerstone events of the water and wastewater industry. WEFTEC has a spacious showroom space spanning two halls, numerous educational and technical meetings, as well as operator challenges and product demonstrations, aiming to bring it back to the forefront of live events. The following are important dates for attending WEFTEC, including the exhibition date and time and the conference selected by WWD editors. This guide only highlights a small selection of the activities planned by WEFTEC, so please visit www.weftec.org for the full program calendar.
Be sure to meet the full editorial team in front of the WWD booth. You can find the WWD team at booth 8032.
When the space is used up, ModMAG M2000 electromagnetic flowmeter is the ideal choice. The M2000 instrument provides an accuracy of ¡ÃƒÂ€1% when zero linear operation is required or ¡À0.2% when it is properly linear.
Chem-Scale and Tote Bin Scale enable operators to accurately monitor chemicals, such as sodium hypochlorite, polymers, and fluoride, as they are stored and supplied from daily tanks and IBC-type tote bags. They can prevent overfeeding and underfeeding, and can record the feed amount.
The M3 peristaltic pump is equipped with a large 5-inch display with touch screen controls. Advanced communication protocols including Modbus TCP, EtherNet IP, ProfiBus and new software allow future firmware updates. The downtime of the metering pump is almost zero.
Knife gate valves that comply with AIS standards can provide air-tight closure in both directions up to the valve’s full rating. Valves that meet the AIS standard meet all the requirements of the US Steel Act. It includes stainless steel body, valve stem, gate and so on.
Econoline pressure transmitters provide performance at the best price. The combination of proven sensors and advanced signal conditioning electronics achieves a total error band (TEB) accuracy of <¡À1% over a pressure range of 30 to 10,000 PSI.
The D12EX-IR LEL transmitter uses smart sensor technology to detect methane in wastewater applications. It stores all calibration and configuration information in the onboard memory so that sensor maintenance can be performed outside the confidential area. The sensor life span provides years of reliable service.
The PAC F66 has a closed impeller that can pass through spherical solids up to 3 inches, which means it can do its job when it is executed. Its well-thought-out design allows BEP to achieve an efficiency of up to 82%, and its filling system is powered by a diaphragm vacuum pump that can provide up to 50 cfm, which means it can fill faster and start pumping faster.
The design of PAC Flow series pumps considers three key characteristics: performance, technology and maintainability to provide ideal performance. With a flow rate of up to 8,600 gpm and a shut-off head of 225 feet, PAC F1212 can be easily transferred and dewatered in quarries and mining applications, complete sewer bypass, and provide a diesel backup system for sewer lifting stations. Regardless of the application, Atlas Copco’s flow series can do the job.
Myron L Company is a manufacturer of precision water quality instruments. For more than 60 years, Myron L Co. has been providing cost-effective, laboratory-accurate, reliable and easy-to-use tools for laboratory and field use. Professionals around the world use hand-held meters and online monitors/controllers in laboratories, industrial, commercial and municipal markets to measure, monitor and control conductivity; resistivity; TDS; pH; oxidation-reduction potential; dissolved oxygen, hardness , Alkalinity and temperature.
Since 1946, Komline-Sanderson has been providing quality equipment for drying, wastewater treatment and sludge treatment applications. Komline-Sanderson’s pumping, thickening, dewatering and drying technologies are used to help wastewater treatment plants reduce sludge and biosolids treatment costs.
Orival Inc. provides an automatic self-cleaning filtration system to remove suspended solids in water. Since its establishment in 1986, Orival has provided thousands of filter units to various customers. The devices are installed in more than 40 countries/regions and comply with any local standards. They are single units, flange-to-flange systems, complete skid-mounted kits, structural standards (ie ASME, API, etc.), alternate flanges or voltage standards.
DeZURIK valves are known for design innovation and quality in water, sewage, pumping stations and industrial wastewater applications. The DeZURIK, APCO, HILTON and Willamette brands with more than 250 years of history are world-renowned for their outstanding performance. From the eccentric plug valve introduced in 1928 to the latest innovations in air valves, butterfly valves, check valves, gate valves, ball valves and poppet valves, they are always at the forefront of technology.
Xylem is a leader in the global water sector, deeply involved in every stage of the water cycle, including transportation, processing, testing and analysis, and then returning it to the environment. The Xylem brand produces highly efficient products and systems that require less maintenance, use less energy, and provide environmental benefits for users and communities.
This article was written by multiple members of the WWD staff. To contact WWD staff, please send an email [email protection].
The Water and Waste Digest staff invites industry professionals to nominate what they consider to be the most outstanding and innovative water and wastewater projects to be recognized in the annual reference guide question. All projects must be in the design or construction stage within the past 18 months.
©2021 Scranton Gillette Communications. Copyright Site Map| Privacy Policy| Terms and Conditions
Post time: Sep-28-2021
