Fulton, Missouri — Danuser, a leading manufacturer of agricultural and construction equipment accessories, is introducing a new column driver and stump auger.
Hornet is a fast and powerful post driver. Jackhammer power battery provides controllable high-speed driving performance. With Danuser’s single grab option, it is an all-in-one driving solution.
• Drive columns or pipes with a maximum diameter of 8 inches for T-pillars—the optional RR cable tie drive tool can also be used to drive RR cable ties.
The hydraulic grab option allows one person to pick up, load and drive the column. Hornet comes standard with a flow control valve that allows the driver to operate on machines with hydraulic flow rates up to 30 GPM.
Tool-free drive tools allow quick replacement, which means that no hammers and punches are required to replace drive tools. Hornet comes standard with dome drive tools, but flat drive tools and flat RR lace tools (T8-RR only) can also be purchased.
The additional weight kit option allows the operator to fine-tune the driver’s weight to match the vehicle’s operating capabilities. The kit includes 14 suitcase weights for a total of 616 pounds of additional weight. Compared with the basic unit, the complete package can increase driving speed by up to 50%.
Other features include a column bracket with a fixed position for transporting columns and pipes; you can start working without setting it up; and a one-year warranty.
The stump auger is a standard 2 inch hexagonal auger attachment, which can remove the stump without the need for large-scale special equipment.
The stump auger is a standard 2 inch hexagonal auger attachment, which can remove the stump without the need for large-scale special equipment. A threaded pilot digs a hole in the stump and then scrapes the stump off with a large blade. The large cutting blade is reversible to extend the cutting life.
The stump auger is available in two diameters of 10 inches and 16 inches. The 10-inch can be operated on auger units with a torque of 1,700 foot-pounds or more, and the 16-inch can be operated on auger units with a torque of 3,000 foot-pounds or more. Completely remove the stump by overlapping planing positions.
Copyright © 2021 agrinews-pubs.com. all rights reserved. Published by Shaw Media in LaSalle, Illinois, USA.
Copyright © 2021 agrinews-pubs.com. all rights reserved. Published by Shaw Media in LaSalle, Illinois, USA.
Post time: Oct-14-2021
