China globe valve installation guide: installation position, direction and precautions
Chinese globe valve is a commonly used fluid control equipment, and its installation position, direction and precautions are crucial to ensure the normal operation and service life of the valve. This article will introduce the installation guide of China globe valve from a professional point of view.
1. Installation position
The installation position of the Chinese globe valve should be determined according to the specific working conditions and use requirements. In general, the Chinese stop valve should be installed in the diameter direction of the pipeline to better control the flow and pressure of the fluid. In addition, the Chinese globe valve should be as close as possible to the inlet or outlet end of the medium to reduce fluid resistance and extend the service life of the valve.
2. Installation direction
The installation direction of the Chinese globe valve should be determined according to the specific working conditions and use requirements. In general, the Chinese globe valve should be installed vertically or horizontally to ensure the sealing performance and adjustment performance of the valve. If the Chinese stop valve needs to be installed horizontally, the valve should be kept perpendicular to the pipe to avoid reverse flow of fluid at the valve.
3. Precautions
(1) The Chinese globe valve should be comprehensively inspected before installation to ensure that the valve is not damaged, loose and other problems, and clean the internal channel.
(2) During installation, attention should be paid to the direction and position of the valve to ensure that the valve is tightly and firmly connected to the pipeline.
(3) During installation, attention should be paid to the opening and closing direction of the valve to ensure that the valve can be opened and closed normally.
(4) During installation, attention should be paid to the protective measures of the valve, such as installing a protective cover, etc., to avoid external damage to the valve.
(5) After installation, the Chinese globe valve should be adjusted and tested to ensure that the valve can normally control the flow and pressure of the fluid.
In short, the installation position, direction and precautions of the Chinese globe valve are crucial to ensure the normal operation and service life of the valve. I hope the introduction of this article can provide you with some reference and help.
Post time: Oct-24-2023
