Chinese globe valve maintenance manual: Tips for extending service life

Chinese globe valve maintenance manual: Tips for extending service life

Chinese globe valve is a commonly used fluid control equipment, and its maintenance is crucial to extend the service life. This article will provide you with a Chinese globe valve maintenance manual from a professional point of view, to help you master the skills to extend the service life of China globe valve.

1. Prepare for installation

Before installing the Chinese globe valve, it is necessary to confirm whether the valve model, specification, pressure grade and other parameters meet the requirements, and select the appropriate Chinese globe valve type according to the pipeline connection method and the nature of the medium. In addition, the tools and materials required for installation should be prepared.

2. Clean and lubricate regularly

Chinese globe valves will produce dirt and wear during use, so they need to be cleaned and lubricated regularly. The specific cleaning and lubrication methods should be determined according to the use of the valve and the working environment. In general, it is recommended to clean and lubricate the Chinese globe valve every once in a while to maintain the normal operation of the valve.

3. Check the sealing performance

The sealing performance of Chinese globe valve is one of its most important performance. When using the Chinese globe valve, the sealing performance of the valve should be checked regularly to ensure that the valve can be closed normally and prevent media leakage. If the valve is found to leak, repair or replace the seal in time.

4. Regular repair and maintenance

In addition to regular cleaning and lubrication and inspection of sealing performance, China globe valves should also be regularly overhauled and maintained. Specifically, it includes checking whether the various parts of the valve are intact, whether the fastening bolts are loose, and whether the packing needs to be replaced. If the valve is found to be faulty or damaged, repair or replace the relevant parts in time.

5. Follow the instructions

When using the Chinese globe valve, the use procedures should be strictly followed to avoid damage caused by overload operation or improper operation. In addition, attention should also be paid to the working environment and use conditions of the valve, such as temperature, humidity, corrosion and other factors to ensure the normal operation and service life of the valve.

In short, correct maintenance is the key to extend the service life of China globe valve. I hope the maintenance manual in this article can provide you with some reference and help.