The angle valve of the faucet needs to be replaced. If it is not replaced in time, rust may often occur. When you go to replace it, it will probably be broken in the water pipe, which makes people feel very headache. If it often costs hundreds of yuan to find professionals, what if the valve is half broken in the water pipe? This issue of like valve online Xiaobian brings unique skills. The teacher will teach you a trick to solve the problem easily!
Half of the valve is broken in the water pipe. Solution:
1. If the old faucet at home is broken, we can find a small saw to cut off the broken part and put the new faucet on the new pipe. We must be careful not to use too much force when we use it. Otherwise, the whole water pipe is easy to break.
In this case, it is relatively simple to deal with, because its pipeline is leaking. As long as we have tools, we can generally do it ourselves. We can directly cut off the pipeline with a saw and replace a new faucet. We must be careful not to be careful and do not exert too much force in the operation process, otherwise it is easy to saw off the pipeline.
2. If the faucet pipe at home is embedded in the wall and the short wire cannot be sawed off directly, we can also slowly cut off the wire with a saw blade, and then slowly knock off the faucet with a hammer and screwdriver.
This approach requires greater hands-on ability and patience of the owner, because if you are not careful, the pipeline is easy to break and will be in trouble at that time. If you can’t do it yourself, you must find the master of the hardware store to do it. However, if you find a master to do it, you may need labor costs.
3. When the faucet valve is disconnected in the pipeline, there is a special solution, that is, use this wire breaker.
Compared with the above two cases, this method is more convenient. When using, we only need to screw the tool into the broken wire first, and then rotate the broken wire with a wrench, which saves both labor and money.
Half of the valve is broken. Replacement method:
1. Close the valve of the water pipe and screw the nut directly above the valve counterclockwise with the pipe clamp.
2. Select the tap water valve of the same specification, remove the damaged valve, install a new valve, open the valve and check whether it can be used.
3. Wrap a white raw material belt around the valve joint and pipe joint and rotate it about 10 times.
Post time: Apr-22-2022
