Separate sealed bids for water system improvements usually include three separate work plans, including: Schedule 1-Conventional water system improvements, usually including 12-inch water pipes (4,989 linear feet (LF)) and 6-inch water pipes (117 LF) , With 12-inch gate valve (3 EA), 6-inch gate valve (6 EA); 3/4″ tap (4 EA); 3/4″ K-type “copper repair line (63 LF); close the existing company Stop (1 EA); connect to the existing water supply pipeline (3 EA); 3/4″ replacement meter, equipped with a radio-based automatic reading system, including hardware and software (64 EA); 6″ and 12″ Steel water tank yard piping; cast-in-place reinforced concrete foundation for new water storage tanks; water tank site work; and renovation of existing well/chlorination buildings, including piping, valves, metering, switchboards, new switchboards, circuit breakers, Control panel, diesel generator and related controls, chemical feeding equipment, extension of the new control line of the electric pole meter and Schedule 2-new water storage tank usually includes: arrangement and erection diameter 14′x 76′ high welding Steel water storage riser, including painting and disinfection Schedule 3-New Dakota sandstone formation well usually includes: installation of a new well, 1,542 feet deep, 12 inches in inner diameter, 8 inches of casing, 8 inches of stainless steel screen, gravel packing, pumps, Motors, downspouts, electrical services, control devices, non-porous devices, welding development and ancillary equipment will be sent by Sheridan Lake Water District in the GMS, Inc. office at 611 North Weber, Suite 300, Colorado Springs, CO 80903, Until 3:00 pm on August 13, 2019, mountain time, and then open to the public in such an office and read aloud.
A certified check or bank draft shall be in the form of a negotiable U.S. government bond (at face value) in the Sheridan Lake area (owner) or a satisfactory tender bond issued by the bidder and an acceptable deposit ( The payment (equal to 5%) (5% of the total bid) shall be submitted together with the bid.
Please note the following facts: The funding requirements for this project include, but are not limited to, the Davis-Bacon wage clause, which stipulates the minimum wage and minimum wage that must be paid for the project in the contract documents, as well as the minimum weekly wage and Minimum wage report. The major decision currently applicable at the time of advertisement is CO20190003 05/10/2019 revision number 3 dated May 10, 2019. Applicable amendments to major decisions will be locked within ten days after the bidding date. The contractor must ensure that employees and employment applications are not discriminated against by race, color, religion, sex or national origin. Bidders should thoroughly review these requirements and comply with these requirements after awarding the project.
Please note the following fact: The project must comply with Article 436 of PL 113-76 of the 2014 Joint Funding Act, in which all steel products provided by the project must be produced in the United States. Appropriate documentation must be provided to verify that this requirement is met.
Copies of the contract documents are available at the office of GMS, Inc., at 611 N. Weber, Suite 300, Colorado Springs, CO 80903, with a payment of $160.00 per set.
Any plan holder who returns the intact contract documents within 30 days of the bid opening will be refunded $40.
If you purchase products or services through the links in the article, KiowaCountyPress.net may receive member commissions. Prices, when displayed, are accurate at the time of publication, but may change over time. The committee does not affect the independence of the editorial.
The Chiowa County News Agency is an independent newspaper published in Eads, Chiowa County, Colorado and distributed to the world on KiowaCountyPress.net.
Post time: Mar-03-2021
