We insist on offering high quality creation with fantastic small business concept, honest gross sales plus the best and fast assistance. it will bring you not only the high quality solution and huge profit, but one of the most significant is to occupy the endless market for Factory making Russia Gost 5762 Cast Carbon Steel Wedge Pn10/16 Manual Gate Valve, As an expert specialized in this field, we are committed to solving any problem of large temperature protection for users.
We insist on offering high quality creation with fantastic small business concept, honest gross sales plus the best and fast assistance. it will bring you not only the high quality solution and huge profit, but one of the most significant is to occupy the endless market for Cast Carbon Steel Wedge Gate Valve, Pn10/16 Manual Gate Valve, Russia Gost 5762 Gate Valve, Our company regards “reasonable prices, efficient production time and good after-sales service” as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.
Technical data
PN(MPa) Nominal pressure |
1.0 |
1.6 |
(MPa) Strength test |
1.5 |
2.4 |
(MPa) Seal test |
1.1 |
1.76 |
Working temperature |
≤120 | |
Suitable media |
water, oil , gas and non corrosive media |
Meterial of main parts
parts |
material |
body |
cast iron, ductile iron,cast steel |
seat |
EPDM, NBR,VITON, PTFE |
disc |
nickel ductile iron,AI bronze, stainless steel |
stem |
carbon steel, stainless steel |
bushing |
PTFE |
“O” ring |
PTFE |
pin |
stainless steel |
key |
stainless steel |
Executive Standard:
Design Standard | EN 593 , MSS SP67 API 609 BS5155 |
Inspection & Test | API 598 ISO 5208 EN 12266 |
End Standard | ANSI B16.1 CL. 125LB & B16.5 CL. 150LBAS 2129 Table D & E BS 10 Table D & EDIN 2501 PN6, PN10 & PN16EN 1092 PN6, PN10 & PN16ISO 2531 PN6, PN10 & PN16ISO 7005 PN6, PN10 & PN16KS B 1511 / JIS B 2210 5K & 10KMSS SP44 CL. 150LB AWWAC207SABS 1123 Table 1000/3 & Table 1600/3 |
Face to Face | ISO 5752 , EN 558 , MSS SP67 and API 609 DIN3202 |
Top Flange | ISO 5211 |
Main dimensions and weight
DN(mm) | L | H | D | D1 | D2 | n-ød | b | f | weight | |||||
1.0 | 1.6 | 1.0 | 1.6 | 1.0 | 1.6 | 1.0 | 1.6 | 1.0 | 1.6 | |||||
40 | 165 | 300 | 150 | 150 | 110 | 110 | 84 | 84 | 4-ø18 | 4-ø18 | 19 | 19 | 3 | 6.5 |
50 | 178 | 340 | 165 | 165 | 125 | 125 | 99 | 99 | 4-ø18 | 4-ø18 | 20 | 19 | 3 | 8 |
65 | 190 | 370 | 185 | 185 | 145 | 145 | 118 | 118 | 4-ø18 | 4-ø18 | 20 | 19 | 3 | 12 |
80 | 203 | 410 | 200 | 200 | 160 | 160 | 132 | 132 | 8-ø18 | 8-ø18 | 22 | 19 | 3 | 20 |
100 | 229 | 450 | 220 | 220 | 180 | 180 | 156 | 156 | 8-ø18 | 8-ø18 | 24 | 19 | 3 | 26 |
125 | 254 | 480 | 250 | 250 | 210 | 210 | 184 | 184 | 8-ø18 | 8-ø18 | 26 | 19 | 3 | 35 |
150 | 267 | 550 | 285 | 285 | 240 | 240 | 211 | 211 | 8-ø23 | 8-ø23 | 26 | 19 | 3 | 48 |
200 | 229 | 630 | 340 | 340 | 295 | 295 | 266 | 266 | 8-ø23 | 12-ø23 | 26 | 20 | 3 | 75 |
250 | 330 | 750 | 395 | 405 | 350 | 355 | 319 | 319 | 12-ø23 | 12-ø28 | 28 | 22 | 3 | 120 |
300 | 356 | 820 | 445 | 460 | 400 | 410 | 370 | 370 | 12-ø23 | 12-ø28 | 28 | 24.5 | 4 | 165 |
350 | 381 | 980 | 505 | 520 | 460 | 470 | 429 | 429 | 16-ø23 | 16-ø28 | 30 | 26.5 | 4 | 230 |
400 | 406 | 1010 | 565 | 580 | 515 | 525 | 480 | 480 | 16-ø28 | 16-ø31 | 32 | 28 | 4 | 270 |
450 | 432 | 1270 | 615 | 640 | 565 | 585 | 530 | 548 | 20-ø28 | 20-ø31 | 32 | 30 | 4 | 450 |
500 | 457 | 1270 | 670 | 715 | 620 | 650 | 582 | 609 | 20-ø28 | 20-ø34 | 34 | 31.5 | 4 | 590 |
600 | 508 | 1390 | 780 | 840 | 725 | 770 | 682 | 720 | 20-ø31 | 20-ø37 | 36 | 36 | 5 | 619 |