Our target is to consolidate and improve the quality and service of existing products, meanwhile constantly develop new products to meet different customersâ demands for High reputation China 1PC/2PC/3PC Type Ball Valve with Internal NPT/Bsp/BSPT Thread, We sincerely welcome customers from both at home and abroad to come to negotiate business with us.
Our target is to consolidate and improve the quality and service of existing products, meanwhile constantly develop new products to meet different customersâ demands for 3 Piece Ball Valve, China 3 PC Ball Valve, Our solutions have national accreditation requirements for qualified, good quality items, affordable value, was welcomed by individuals all over the world. Our merchandise will continue to improve inside the order and appear forward to cooperation with you, Actually must any of all those products be of interest to you, remember to letus know. We are going to be satisfied to supply you a quotation up on receipt of the thorough needs.
Body pressure detection
|
ANSI B 16.34 Section 7.1 |
||
|
Valve size NPS |
Test pressure  |
Test time sce |
|
DN50¡à |
1:5 times the 100¡ãC F |
15second |
|
DN65-200 |
Rating of AN ST Class |
60second |
|
DN250¡à |
Max. operating pressure |
180second |
|
Detect pressure than the maximum working pressure  valve 1.5 times higher (100F) |
||
1.Seal hydrostatic test:The pressure should be more 1.1 times than working pressare by seal hydrastatic test.
|
ANSI B 16.34 Section 7.2 |
||
|
Valve size NPS |
Test pressure  |
Test time sce |
|
DN50¡à |
1:5 times the 100¡ãC F |
15second |
|
DN65-200 |
Rating of AN ST Class |
30second |
|
DN250¡à |
Max. operating pressure |
60second |
|
Detect pressure than the maximum working pressure  valve 1.5 times higher (100F) |
||
2.Seal air test: Seal air leakage test is based on 80psig (6kgf/cm^ nin-actiue gas or full filled with air, after dose the valve, then check it is leakage or not by one side  of the valve.