Technical parameters of static balance valve
Nominal pressure:1.6MPa
Nominal diameter:15~600mm
Applicable medium: water, oil and other non corrosive liquids
Applicable temperature:0~100℃
Flange standard:GB/T 17241.6、GB/T 9113、EN1092
Test standard:GB/T 13927、API 598
Typical installation diagram
diagram
Material of main parts
Part name | Body / bonnet / disc / packing sleeve | stem seal | Stem / nut | Washer | filler |
Material Science | Gray iron, ductile iron | stainless steel | Cast copper | Rubber asbestos board | expanded graphite |
Main connection dimensions Company:mm
DN | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 500 | 600 |
L | 130 | 150 | 160 | 180 | 200 | 230 | 290 | 310 | 350 | 400 | 480 | 495 | 622 | 698 | 787 | 914 | 978 | 1295 |
H | 150 | 160 | 182 | 192 | 250 | 264 | 380 | 413 | 446 | 540 | 623 | 687 | 782 | 914 | 968 | 1037 | 1440 | 1790 |
H1 | 160 | 170 | 197 | 207 | 270 | 284 | 410 | 448 | 506 | 595 | 688 | 762 | 867 | 1009 | 1073 | 1152 | 1440 | 1790 |
D0 | 80 | 180 | 80 | 90 | 100 | 120 | 200 | 200 | 240 | 240 | 360 | 400 | 500 | 500 | 680 | 680 | - | - |
Send your message to us:
Write your message here and send it to us