LocationTianjin, China (Mainland)
EmailEmail: sales@likevalves.com
PhonePhone: +86 13920186592

Temperature control valve how to adjust the temperature (temperature controller valve how to set)

Temperature control valve how to adjust the temperature (temperature controller valve how to set)

水利控制阀2
Controllable temperature radiator in life, basically will be modified as the temperature control valve, according to the shaking method to adjust the temperature, most of each electric water heater is to install similar valves, many customers for the first time is not too skilled, so how to adjust the temperature of the temperature control valve? How to set the temperature controller valve? Today like Valve will teach you how to use it properly!

First, how to adjust the temperature of the temperature control valve
Temperature control valve regulation:
1, the temperature control valve is divided into three temperature control valve, two temperature control valve, the general home application of two can, while connecting the radiator pipeline, while connecting the radiator; According to its perspective points, can be divided into 90 degrees triangle valve and straight valve; Installation of its specifications and dimensions, can be divided into 4 specifications, 6 caliber, there are 1 inch specifications;
According to its working mode, can be divided into intelligent automatic temperature control valve, manual temperature control valve. Then combined, there are various specifications, customers according to their own radiator specifications, installation methods and other standards to buy suitable for their home application of the temperature control valve.
2, radiator standard is equipped with a group of radiator installed 2 temperature control valve, but at this stage is a group of radiator a temperature control valve, flow control valve, only need to use a temperature control valve to adjust the temperature. There are five scales on the radiator temperature control valve, 0-5, which can be adjusted moderately according to their comfort. Some customers say that their home radiator does not use the temperature control valve at all, because the radiator temperature is very rare is too hot, so it is not used.
There is a car gear regulator on the top of the temperature controller. There are data in this place that show that 0-5 gear can be adjusted according to the application requirements. 5 gear is the maximum temperature, 0 gear is very large temperature, if the water is moved to 5 gear, the temperature will rise quickly
In the periphery of the radiator to some heat exhaust indoor space, do not place objects around the radiator, do not add dust cover on the radiator, such items will directly affect the actual effect of heat conduction radiator.
Two, how to set the temperature controller valve
1, open all the valves to a relatively large, for a period of time to see which room temperature is higher;
2, adjust the temperature of the bedroom radiator before the water valve, turn down a little, remember to adjust, one can not adjust too much; Check again periodically to see which room is hotter.
3. Repeat the first and second steps until the temperature of each bedroom is balanced, that is, the temperature is the same;
Radiator 2 temperature control valve is generally in the left and right pipeline sewage outlet each one, usually the inside of the power switch, the temperature of the water can be transferred below. The two sides of the temperature control valve are marked with arrow symbols. The two sides are biased to 0 and 5 respectively. Rotate the temperature control valve to the side of 5.
If there is no arrow symbol, there is no data, the general clockwise off, the reverse on. The letter stands for “S”, “shut”, “O”, “open”. For a door valve, open the valve in the same direction as the pipe, and close the valve in the vertical direction.
The temperature control valve can control the amount of boiling water into the heating tube, the more the total flow of boiling water, the higher the temperature, on the contrary, the lower the temperature, a time to control the amount of heat. Usually after heating gradually applied, it is proposed to immediately screw to the larger, when the water yield is larger, the temperature will be raised quickly, and then gradually reduce the temperature in accordance with the situation.


Post time: Apr-29-2022

Send your message to us:

Write your message here and send it to us
WhatsApp Online Chat !