Ka whakamahia e te matua o te valve te hanganga toenga pehanga, me te iti o te whakatuwhera me te kati kati. Ko te ahua mahi o te rereketanga o te pehanga teitei ka taea te whakahaere ma te pana o te kaiwhakatere iti. Kei te whakamahia whānuitia i roto i te whakahaere wē o te reo iti pāmahana me te reo iti pehanga pipelines e hiahia pai pūmautanga hihiri. He pai te mahi hiri me te rereketanga pehanga nui e whakaaetia ana. Aratohu ringaringa parahi, he waahi arataki nui, he pai te pumau, he hanganga kiato, ka taea te whakakapi tere i roto i nga riipene a-ipurangi, te pai o te tiaki, te whakaora tangata me te wa. Ko te hanganga matua o te paera toenga e whakarite ana i te iti o te pana o te kaiwhakatere.
tawhā hangarau
| Te ahua o te tinana takirere | Totika ma roto i te momo-S reera maka |
| Puka matua takirere | Potae ringaringa hiri taurite |
| Te diameter ingoa | DN25~300mm；NPS 1″~12″ |
| Te pehanga ingoa | PN1.6~16MPa; KAUPAPA 150~1500LB |
| Te pāmahana e tika ana | -196~+550 ℃ (kōwhiringa kia rite ki nga tikanga mahi) |
| Puka hono | Flange, fehokotaki, miro (mo te 1 "i roto) |
| Tawhiti flange | kia rite ki te IEC 60534 |
| Momo repe | Momo kōpeke raka |
| Kerekere hiri | Korekau kauwhata porowhita maru maru |
| whakakī | PTFE, kauwhata hangore |
| Kaihanga | Kaihuri hiko, hiko hiko |
He ānau ahua rere o runga karekau aratohu takirere mana
Rauemi o nga waahanga matua
He waro maitai te tinana
| 1 | tinana takirere | WCB | LCB | WC9 |
| 2 | whiti | 316+kauwhata | ||
| 3 | ringaringa | 304 | 304 | 304 |
| 4 | poroporo | 304 | 304 | 304 |
| 5 | whiti | 316+kauwhata | ||
| 6 | Stud | 304 | 304 | 304 |
| 7 | Nati | 304 | 304 | 304 |
| 8 | Uwhi takirere | WCB | LCB | WC9 |
| 9 | Kakau | 304 | 304 | 304 |
| 10 | whakakī | PTFE + graphite ngawari | ||
| 11 | Nati maukati | 304 | 304 | 304 |
| 12 | Karekau pehi | 304 | 304 | 304 |
| 13 | Perehi pereti | 304 | 304 | 304 |
He kowiri tira te tinana
| 1 | tinana takirere | CF8 | CF8M | CF3M |
| 2 | whiti | 316+kauwhata | ||
| 3 | ringaringa | 304 | 316 | 316L |
| 4 | poroporo | 304 | 316 | 316L |
| 5 | whiti | 316+kauwhata | ||
| 6 | Stud | 304 | 316 | 316L |
| 7 | Nati | 304 | 316 | 316L |
| 8 | Uwhi takirere | CF8 | CF8M | CF3M |
| 9 | Kakau | 304 | 316 | 316L |
| 10 | whakakī | PTFE + graphite ngawari | ||
| 11 | Nati maukati | 304 | 316 | 316L |
| 12 | Karekau pehi | 304 | 316 | 316L |
| 13 | Perehi pereti | 304 | 316 | 316L |
Tuhipoka: 1. Ko te hanganga i runga ake nei ko te whirihoranga paerewa, ko te nohoanga takirere he hiri whakarewa, he hiri ngohengohe te nohoanga o te paera, kua tohua te whiringa tohu VI. Kei te waatea nga waahanga o roto o te rehu carbide cimented.
2. Ko nga taonga tikanga he waro waro me te kowiri tira, a ka taea te whakarite i nga hua o te mana whakahaere me nga taonga motuhake kia rite ki nga ahuatanga o te waahi o te kaiwhakamahi.
Tawhā whakapūtātanga o runga aratohu ringaringa regulator
| Diamita nohoanga（mm） | 251 | 321-1/4 | 401-1/2 | 502 | 652-1/2 | 803 | 1004 | 1255 | 1506 | 2008 | 25010 | 30012 | ||
| whakarea tuku（Kv） | raina tika | 10 | 15 | 25 | 40 | 63 | 100 | 160 | 250 | 400 | 630 | 1000 | 1400 | |
| Ōrite ōrau | 11 | 17.6 | 27.5 | 44 | 69 | 110 | 176 | 275 | 440 | 690 | 1100 | 1500 | ||
| caliber（DN） | haerenga | Ko te whakarea rere whiriwhiri Cv (★ momo paerewa, e taunaki ana me te whakarite) | ||||||||||||
| 25 | 1 | 16mm | ★ | |||||||||||
| 32 | 1-1/4 | 25mm | te | ★ | ||||||||||
| 40 | 1-1/2 | te | • | ★ | ||||||||||
| 50 | 2 | te | • | • | ★ | |||||||||
| 65 | 2-1/2 | 40mm | te | te | te | ★ | ||||||||
| 80 | 3 | te | te | te | • | ★ | ||||||||
| 100 | 4 | te | te | te | • | • | ★ | |||||||
| 125 | 5 | 60mm | te | te | te | ★ | ||||||||
| 150 | 6 | te | te | • | ★ | |||||||||
| 200 | 8 | te | te | • | • | ★ | ||||||||
| 250 | 10 | 100mm | te | • | • | ★ | ||||||||
| 300 | 12 | te | • | • | ★ | |||||||||
| He kaiwhakatere pneumatic | HA/B-23 | HA/B-34 | HA/B-45 | HA/B-56 | ||||||||||
| 350cm² | 560cm² | 900cm² | 1400cm² | |||||||||||
| Aratau mahi | Awhe puna | He rereke te pehanga o te hiri whakarewa (MPa) | ||||||||||||
| Te whakatuwheratanga o te hau | 20-100KPa | 3.0 | 2.25 | 2.25 | 1.95 | 2.36 | 2.04 | 1.67 | 1.41 | 1.41 | 1.14 | 0.65 | 0.55 | |
| 40-200KPa | 6.4 | 6.4 | 6.4 | 6.4 | 6.4 | 6.4 | 6.4 | 6.4 | 6.4 | 6.4 | 1.55 | 1.4 | ||
| 80-240KPa | 6.4 | 6.4 | 6.4 | 6.4 | 6.4 | 6.4 | 6.4 | 6.4 | 6.4 | 6.4 | 4.08 | 4.08 | ||
| Te kati hau | 20-100KPa | 1.5 | 1.13 | 1.13 | 0.98 | 1.18 | 1.02 | 0.84 | 0.71 | 0.71 | 0.57 | 0.65 | 0.55 | |
| 40-200KPa | 4.5 | 3.38 | 3.38 | 2.93 | 3.54 | 3.06 | 2.51 | 2.12 | 2.12 | 1.71 | 0.8 | 1.55 | ||
| 80-240KPa | 6.4 | 6.4 | 6.4 | 6.4 | 6.4 | 6.4 | 5.85 | 4.94 | 4.94 | 4.0 | 4.08 | 3.65 | ||
| Kaihuri hiko | He rereke te pehanga o te hiri whakarewa (MPa) | |||||||||||||
| pana（N） | 800 | 6.4 | 6.4 | |||||||||||
| 2000 | 6.4 | 6.4 | 6.4 | 5.1 | ||||||||||
| 3000 | 6.4 | 6.4 | 6.4 | 6.4 | 5.7 | 4.76 | ||||||||
| 5000 | 6.4 | 6.4 | 6.4 | 6.4 | 6.25 | |||||||||
| 6500 | 6.4 | 6.4 | 4.23 | 3.23 | ||||||||||
| 10000 | 6.4 | 6.1 | 3.31 | 2.07 | ||||||||||
| 16000 | 6.0 | 4.0 | ||||||||||||
Nga tawhā kaiwhakatere
| tauira puka | Kei te mohio ahau ki nga kaiwhakaari kiriata | Kaihuri hiko |
| ZH23~ZH56 | 3810L, RSL | |
| Momo puna maha | Maamaa whakauru | |
| kaupapa | Whakatikatika, whakawhiti | whakatika |
| taraiwa | Te pēhanga hau (awhe puna) 140（20~100）KPa G240（40~200）KPa G280（80~240）KPa G | Tuku Hiko:AC 220 V±10%50Hz Whakawhiwhi Hiko:AC 380 V±10%50Hz |
| Kaihono | Rc 1/4 | Momo noa:2-PF(G 1/2″) Momo muramura:2-PF(G 3/4″) |
| Painga pai | Ko te pikinga o te pehanga hau ka pana te takirere kia kati | Ko te pikinga o te tohu mana ka pana te takirere kia kati |
| Tauhohenga | Ko te pikinga o te pehanga hau ka turaki i te takirere kia tuwhera | Ko te pikinga o te tohu mana ka pana te takirere kia tuwhera |
| tohu whakahaere | 4~20mA.DC (me te tuunga) | Whakauru me te whakaputa 4 ~ 20mA.DC |
| takamuri | ≤1%FS (me te tūnga) | ≤0.8%FS |
| Rarangirangi | 2%FS (me te tuunga) | ≤0.8±1%FS |
| pāmahana ambient | -10~+70 ℃ | |
| Te paninga mata | Te tinana o te takirere: he kaiwhakatere maimoatanga phosphating pango: peita polyurethane kiriaku | |
| Ko nga taputapu whiriwhiri | Te tuunga o te takirere, te wira a-ringa, te reera solenoid, te whakawhiti haere, te waahi pupuri turanga | whakamahana |
Ko nga tawhā mahi matua o te kaiwhakahaere ringaringa kaiarahi runga
| Nga ahuatanga rere | Ōrite te ōrau, rārangi torotika | ||
| Awhe taea te whakarite | 50:1 | ||
| Whakatauria CV | Ōrite ōrau:10~1400 raina tika:11~1500 | ||
| Leakage whakaaetia | Koeke hiri: IV (0.01% te rere o te rerenga tohu); hiri ngawari: v | ||
| taupū mahi | Aratau taraiwa | Pneumatics | Hiko |
| Hapa taketake | ±1.0 | ±1.0 | |
| Rerekētanga whakahoki | ≤1.0 | ≤1.0 | |
| rohe mate | ≤0.6 | ≤1.0 | |
| I nga wa katoa te tohu ine | ±2.5 | ±2.5 | |
| Te Whakataunga Irirangi Haerenga | ≤2.5 | ≤2.5 | |
Te tuhi o te mahunga o runga pneumatic mahunga o runga kaiarahi karekau mana whakahaere
Te rahinga hononga o te paera mana pneumatic
| DN I roto | 203/4 | 251 | 321-1/4 | 401-1/2 | 502 | 652-1/2 | 803 | 1004 | 1255 | 1506 | 2008 | 25010 | 300 12 | |
| L | PN16/25 | 181 | 184 | 200 | 222 | 254 | 276 | 298 | 352 | 410 | 451 | 600 | 650 | 700 |
| PN40 | 181 | 184 | 200 | 222 | 254 | 276 | 298 | 352 | 410 | 451 | 600 | 670 | 770 | |
| PN64 | 210 | 210 | 210 | 241 | 286 | 311 | 337 | 394 | 440 | 508 | 650 | 690 | 800 | |
| H | PN16/25 | 52.5 | 57.5 | 75 | 75 | 85.5 | 92.5 | 100 | 110 | 142.5 | 158 | 170 | 195 | 230 |
| PN40 | 52.5 | 57.5 | 75 | 75 | 82.5 | 92.5 | 100 | 117.5 | 150 | 167.5 | 187.5 | 205 | 245 | |
| PN64 | 65 | 40 | 85 | 85 | 90 | 102.5 | 107.5 | 125 | 172.5 | 195 | 207.5 | 230 | 260 | |
| H1 | 132 | 132 | 158 | 170 | 179 | 214 | 221 | 234 | 270 | 294 | 331 | 390 | 450 | |
| H2 | 285 | 285 | 285 | 285 | 285 | 360 | 360 | 360 | 470 | 470 | 470 | 580 | 580 | |
| H3 | 208 | 208 | 224 | 228 | 228 | 334 | 334 | 342 | 408 | 453 | 482 | 520 | 550 | |
| H4 | 153 | 153 | 153 | 153 | 153 | 181 | 181 | 181 | 247 | 247 | 247 | / | / | |
| A | 200 | 200 | 200 | 200 | 200 | 240 | 240 | 240 | 350 | 350 | 350 | 450 | 450 | |
| C | 282 | 282 | 282 | 282 | 282 | 360 | 360 | 360 | 470 | 470 | 470 | 650 | 650 | |
| flange | Ka taea te whakahaere: GB, HG, JB, DIN, JIS, ANSI Me etahi atu paerewa e rite ana | |||||||||||||
Te tuhi o te mahunga hiko o runga kaiarahi karekau mana takirere
Te rahinga hononga o te hiko mana hiko
| DN I roto | 203/4 | 251 | 321-1/4 | 401-1/2 | 502 | 652-1/2 | 803 | 1004 | 1255 | 1506 | 2008 | 25010 | 300 12 | |
| L | PN16/25 | 181 | 184 | 200 | 222 | 254 | 276 | 298 | 352 | 410 | 451 | 600 | 640 | 880 |
| PN40 | 181 | 184 | 200 | 222 | 254 | 276 | 298 | 352 | 410 | 451 | 600 | 640 | 880 | |
| PN64 | 210 | 210 | 210 | 251 | 286 | 311 | 337 | 394 | 440 | 508 | 650 | 810 | 950 | |
| H | PN16/25 | 52.5 | 57.5 | 75 | 75 | 85.5 | 92.5 | 100 | 110 | 142.5 | 158 | 170 | 195 | 230 |
| PN40 | 52.5 | 57.5 | 75 | 75 | 82.5 | 92.5 | 100 | 117.5 | 150 | 167.5 | 187.5 | 205 | 245 | |
| PN64 | 65 | 40 | 85 | 85 | 90 | 102.5 | 107.5 | 125 | 172.5 | 195 | 207.5 | 230 | 260 | |
| H1 | 132 | 132 | 158 | 170 | 179 | 214 | 221 | 234 | 270 | 294 | 331 | 390 | 450 | |
| H2 | 373 | 373 | 456 | 456 | 538 | 538 | 548 | 548 | 725 | 725 | 725 | 795 | 795 | |
| H3 | 208 | 208 | 224 | 228 | 228 | 334 | 334 | 342 | 408 | 453 | 482 | 520 | 550 | |
| H4 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | |
| A | 225 | 225 | 225 | 255 | 255 | 255 | 255 | 255 | 310 | 310 | 310 | 350 | 350 | |
| flange | Ka taea te whakahaere: GB, HG, JB, DIN, JIS, ANSI Me etahi atu paerewa e rite ana | |||||||||||||
