The exhaust valve can not only control the sound of vehicle exhaust, but also affect the exhaust back pressure. The installation position of the exhaust valve is also very particular. If there are some problems in the installation at the time of replacement, which position of the exhaust valve is installed? Like valve explains the installation position of exhaust valve for you!
The exhaust valve shall be installed directly above the pipeline.
1. Usually in the process of circulating pipeline, the pump or oil pump contains certain gas in the pumped medium.
2. The exhaust valve is usually installed directly above the flow pipeline and installed vertically.
3. Because the pipeline can discharge some gas to reduce pressure under full load, the exhaust valve must be higher than the circulating medium pipeline and not lower than the circulating medium, otherwise it is easy to be blocked and the exhaust effect cannot be achieved.
The exhaust valve is generally installed at the front end of the head section, the middle section silencing drum and the rear end of the middle section silencing drum. Generally, high-performance vehicles with cracked sound waves will install the exhaust valve at the rear end of the middle section silencing drum.
If it is installed at the front end of the silencing drum, the exhaust gas will be discharged directly from the valve and affect the low torsional power of the vehicle. Therefore, a better way is to install it at the rear end of the middle silencing drum, which can not only make the exhaust sound better, but also avoid power loss.
Generally, the exhaust valve shall be installed at the upper right of the radiator, which is close to the radiator switch. The radiator needs to be deflated regularly during use, so the radiator exhaust valve must be installed in the correct position and installed vertically, so as to ensure the normal use of the exhaust valve.
Post time: Apr-22-2022
